Power Controllers for your Model Railway
|
| Please note that
we can only supply controllers as part of an order for a complete model
railway. To purchase any of these items individually, please
contact your local supplier or, in the case of Morley
Controllers, the manufacturer directly. |
|
|
The Bachmann 1/2 amp Power Pack and Speed Controller
can be used to control one train. Ideal for single track starter sets.
Knob for Speed, Switch for Direction.
Please note, this unit is not capable of powering electric points. |
 |
Gaugemaster Model Combi
A Single Track controller which comes complete with a separate,
dedicated transformer plugging directly into a wall socket with a 1.8m
lead to plug into the controller.
Knob for Speed, Switch for Direction. |
  |
The Hornby R965 Power Controller and R964
Transformer can be used to control one train and supply power for
point motors and lights. Ideal for small and medium starter sets.
Knob for Speed, Switch for Direction. |
 |
Gaugemaster 100M Single Track
Controller
Controller, with additional 16V AC and
12V DC outputs. This unit can be extended to control two
tracks with the addition of a hand held controller.
Knob for Speed, Switch for Direction. |
 |
Morley VESTA 'N' Gauge Twin Track Controller
Output: 2 x 12 volts DC
1 x 12 volts DC uncontrolled.
Locomotive direction change by centre off knobs. Supplied with two hand held units providing power and direction.
On-board Capacitor Discharge Units (CDU) for point motor operation. |
 |
Gaugemaster Model D Twin Track
Controller
Controller with additional
16V AC and 12V
DC outputs.
Knobs for Speed, Switches for Direction. |
 |
Morley VECTOR Twin Track Controller
Twin track controller suitable for N, 00 and almost all small gauge systems.
Output: 2 x 12 volts DC at 1.1 amps
1 x 12 volts DC uncontrolled.
Locomotive direction change by centre off knobs. Supplied with two hand held units providing power and direction.
On-board Capacitor Discharge Units (CDU) for point motor operation. |
 |
Morley VORTRAK Four Track Controller
Suitable for '00' 'H0' and 'N' gauge layouts.
Output: 4 x 12 volts DC at 1.1 amps
2 x 12 volts DC accessory outputs
Locomotive direction change by centre off knobs. Supplied with two hand held units providing power and direction.
On-board Capacitor Discharge Unit (CDU) for point motor operation. |
